Replacement Street Front Brake Disc, Slotted Direct Drive V2
(Left OR Right)
378mm diameter and thickness is 32mm
Brake disc only, does not include brake bell
This Product Fits:
Porsche 997 GT3 Cup (tarmac)
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now.
With PFC’s two-piece floating Direct Drive disc assemblies, the disc flange floats in the fitting structure, allowing radial and axial expansion of the disc without being constrained by the hub or hat.
Years of R&D and thousands of race miles have resulted in the development of PFC’s patented Direct Drive system
Direct Drive V2 is an integral drive in hat system and is a second generation disc mounting system designed to enhance the Z-Rated Big Brake kits by reducing the number of components and overall disc assembly weight.
- Porsche 997 MKII GT3 2010>>
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type wet, front axle 410 x 36 mm left
- Brake disc type wet, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type wet, rear axle 390 x 32 mm left
- Brake disc type wet, rear axle 390 x 32 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
211711371
The product you are viewing cross references to these numbers
- Porsche 991 GT3 3.8L (475Bhp)
Disc size 379mm
This Product Fits:
Porsche 997 MKII 2009-11 TURBO / GT2 Front
Porsche 991 2012-16 TURBO Front
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
379.069.6
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
Two-piece floating slotted V3 front iron disc upgrade
(including road centre-lock wheels).
Disc size : 380 x 34 mm
These assemblies will replace the steel version with 380mm front and rear disc. From our information, the Porsche 981GT4 and 991GT3 with PCCB are 410mm front /390mm rear. PFC are working on replacement disc for PCCB cars.
This Product Fits:
Porsche 991 GT3 2012>>
Porsche Cayman 981C GT4 2014>>
Porsche Cayman 718 GT4
Porsche GT3 RS
Not suitable as PCCB conversion 991G
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
380.070.6
The product you are viewing cross references to these numbers
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
