Fire extinguisher kit. Porsche 991 GT2 GT3RS - 99172211582
Code: 99172211582
2.5 kg Fire Suppression Handheld NOVEC 1230 Gas Extinguisher.
Installation Kit Contents:
1 x Bracket
2 x Stainless Steel Straps
To Fit Porsche 991 GT3
Capacity: 2.5kg
Total weight: 3.6kg
Cylinder: Aluminium
Size (w x d x h): 105 x 115 x 400
Pressure: Stored Pressure 14 Bar
Operating Temperature range: -15 to +60ºC
Distance: 1.5 to 2.5 metres
Pressure: Stored Pressure 14 Bar
Maintenance/Service:
Every 6 months check that the nozzle is clear, the seal is intact and pressure reading is in the green zone. If seal is broken or pressure is in the red zone – withdraw from service and contact manufacturer.
Return to manufacturer when service required, or after complete or partial discharge.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99172211582
The product you are viewing cross references to these numbers
Installation Kit Contents:
1 x Bracket
2 x Stainless Steel Straps
To Fit Porsche 991 GT3
Capacity: 2.5kg
Total weight: 3.6kg
Cylinder: Aluminium
Size (w x d x h): 105 x 115 x 400
Pressure: Stored Pressure 14 Bar
Operating Temperature range: -15 to +60ºC
Distance: 1.5 to 2.5 metres
Pressure: Stored Pressure 14 Bar
Maintenance/Service:
Every 6 months check that the nozzle is clear, the seal is intact and pressure reading is in the green zone. If seal is broken or pressure is in the red zone – withdraw from service and contact manufacturer.
Return to manufacturer when service required, or after complete or partial discharge.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99172211582
99172211582
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Price: £987.76
Orderable 
Related products
Rennline Safety Sticker and Decal Kit
Code: E30
Rennline Safety Sticker and Decal Kit.
Rennline 34 piece vinyl decal kit fulfill the requirements of race regulations enforced by many race class governing bodies. This kit includes:
(8) Jack Point Decals
(12) Tow Decals
(4) Turn This Way decals
(2) Battery Disconnect Decals
(4) Neutral Safety Stickers
(2) Rennline Decal
Note: Pictures may not show actual product.
Rennline 34 piece vinyl decal kit fulfill the requirements of race regulations enforced by many race class governing bodies. This kit includes:
(8) Jack Point Decals
(12) Tow Decals
(4) Turn This Way decals
(2) Battery Disconnect Decals
(4) Neutral Safety Stickers
(2) Rennline Decal
Note: Pictures may not show actual product.
£29.00
Now £28.42
In stock
Rennline Universal Fire Extinguisher Mount
Code: FE09
Rennline Universal Fire Extinguisher Mount
Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. This particular mount is specifically designed with race seats in mind. It is fully adjustable in height, width, length, and angle, allowing you to mount it on virtually any race seat configuration. For seats mounted to sliders, this brackets can be mounted to the top side of the slider allowing the extinguisher to move with the seat. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included.
For installation instructions CLICK HERE
Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. This particular mount is specifically designed with race seats in mind. It is fully adjustable in height, width, length, and angle, allowing you to mount it on virtually any race seat configuration. For seats mounted to sliders, this brackets can be mounted to the top side of the slider allowing the extinguisher to move with the seat. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included.
For installation instructions CLICK HERE
Prices from: £220.50
Quick disconnect fire extinguisher mount. Universal - Fits all Rennline mounts.
Code: FE12
Quick disconnect fire extinguisher mount. Universal - Fits all Rennline mounts.
Fire Extinguishers are sold separately.
If your car is on fire, the last thing you want to do is fumble with clamps and brackets found on traditional fire extinguisher mounts. In these critical moments the Rennline Fire Extinguisher Quick Release can mean the difference between a minor incident and a total loss. This mount is equipped with Rennline's exclusive Detent Release System (DRS) resulting in the smoothest, most precise operation possible. Designed with the racetrack in mind, our Quick Release is a true metal-to-metal mount which meets all sanctioning body requirements and works with all 3 inch extinguishers. Fully CNC machined from aerospace grade aluminum and assembled with stainless steel hardware, they are designed as a direct bolt on for all Rennline and most aftermarket fire extinguisher mounts.
Fire Extinguishers are sold separately.
If your car is on fire, the last thing you want to do is fumble with clamps and brackets found on traditional fire extinguisher mounts. In these critical moments the Rennline Fire Extinguisher Quick Release can mean the difference between a minor incident and a total loss. This mount is equipped with Rennline's exclusive Detent Release System (DRS) resulting in the smoothest, most precise operation possible. Designed with the racetrack in mind, our Quick Release is a true metal-to-metal mount which meets all sanctioning body requirements and works with all 3 inch extinguishers. Fully CNC machined from aerospace grade aluminum and assembled with stainless steel hardware, they are designed as a direct bolt on for all Rennline and most aftermarket fire extinguisher mounts.
Prices from: £338.10
