Retro Performance Pistons and cylinders

This is a new set 86mm Porsche 356/912 CP pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with CP Forged pistons with 30° Angle.

CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and wire locks with tool.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PCP

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 82.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081182PJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 83.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081183PJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 83.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 9.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081183CJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 JE pistons & cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Cast Iron with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186CJE

您正在查看的产品与这些编号存在交叉引用关系

这是一套全新的 86 毫米保时捷 356/912 JE 活塞和气缸。

#复古表演#

它适用于保时捷 356；A 和 B，Super 90，1955-63 年，带 3 件式外壳。气缸为铸铁，带 22° 角度的 JE锻造活塞。

JE 锻件由 2618 铝制成，它们具有 0 偏移，顶部下方有额外的材料用于阀袋。此套件在工厂保时捷箱体和头部安装时无需机械加工。

发动机排量：1600cc
行程：74mm
气缸：铸铁
活塞：JE 2618 锻造
圆顶高度：.155
压缩率：9.5:1
活塞角度：22°

套件包括： 4 个气缸、4 个活塞、一组活塞环以及 4 个活塞销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186AJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of Big Bore 86mm Porsche 356/912 pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are Biral with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PB

您正在查看的产品与这些编号存在交叉引用关系

这是一套新的大口径 86 毫米保时捷 356 活塞和气缸。

#复古表演#

它适用于保时捷 356；A 和 B，Super 90，1955-63 年，带 3 件式外壳。气缸为 Biral，带石墨涂层过共晶活塞，角度为 22°，带阀袋和 22 毫米销。此套件在工厂保时捷外壳和头部安装时无需机械加工。

发动机排量：1600cc
行程：74mm
气缸：双缸
活塞：过共晶
圆顶 CC：17
压缩率：9.2:1
活塞角度：22°

套件包括：4 个气缸、4 个活塞、一组活塞环以及 4 个活塞销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of Big Bore 86mm Porsche 356/912 pistons and cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are cast iron with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PS

您正在查看的产品与这些编号存在交叉引用关系

这是一套新的大口径 86 毫米保时捷 356 活塞和气缸。

#复古表演#

它适用于保时捷 356；A 和 B，Super 90，1955-63 年，带 3 件式外壳。气缸为铸铁，带石墨涂层过共晶活塞，角度为 22°，带阀袋和 22 毫米销。此套件在工厂保时捷外壳和头部安装时无需机械加工。

发动机排量：1600cc
行程：74mm
气缸：铸铁
活塞：过共晶
圆顶 CC：17
压缩率：9.2:1
活塞角度：22°

套件包括： 4 个气缸、4 个活塞、一组活塞环以及 4 个活塞销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PA

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 JE pistons with Biral cylinders.



It fits Porsche 356; A and B, Super 90, 1955-63 with the 3 piece Case. The Cylinders are Biral with JE Forged pistons with 22° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 22°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186BJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 JE pistons with Biral cylinders.



It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.

JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.

Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186PJE

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 86mm Big Bore Porsche 356 or 912 Cast Iron Liners. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Cast Iron.
Kit included: 4 Cylinders

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186SL

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 83.5mm Big Bore Porsche 356 or 912 Biral Liners. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Biral
Kit included: 4 Cylinders

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081183BL

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 86mm Big Bore Porsche 356 or 912 Biral Liners. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Biral.
Kit included: 4 Cylinders

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186BL

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 82.5mm Porsche 356 or 912 Biral Liners. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Biral
Kit included: 4 Cylinders

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081182BL

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 80mm Pre A Porsche 356 Liners for the 2 piece split case. This kit requires no machine work.


Fits:
Porsche 356 Pre-A

This Kit is also commonly used as a Big bore Cylinder set for the early VW 36 HP Machine work is Required when installing them in a 36HP

Cylinders: Cast Iron.
Kit included: 4 Cylinders

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081180L

您正在查看的产品与这些编号存在交叉引用关系

这是一套全新的 80 毫米保时捷 356 活塞和气缸。

#复古表演#

它适用于 1948-55 年的 356 Pre A 保时捷，配有早期的两件式表壳。

气缸由铸铁制成，配有带阀袋的石墨涂层过共晶活塞和 22 毫米销钉。此套件在工厂保时捷箱体和头部安装时无需机械加工

它也常用作早期 36 马力大众发动机的大口径补充，但需要大量的机械工作。

发动机排量：1500cc
行程：74mm
气缸：铸铁。
活塞：过共晶
穹顶 CC：0
活塞角度：平顶

套件包括： 4 个气缸、4 个活塞、一组活塞环以及 4 个活塞销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081180S

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of 80mm Porsche 356 pistons. It fits Pre "A" Porsche 1948-55 with the early 2 piece Case. Pistons are Graphite Coated Hypereutectic with valve pockets, and the 22mm Pin.


Fits: Porsche 356 Pre A 1500cc

It is also commonly used as a big bore supplement for the early 36 Horse VW Engine, but requires a lot of machine work.

Engine size: 1500cc
Stroke: 74mm
Pistons: Hypereutectic

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081180P

您正在查看的产品与这些编号存在交叉引用关系

这是一套新的大口径 86 毫米保时捷 356 活塞。

#复古表演#

适合：保时捷 356 A 和 B、Super 90、1955-63 年，带 3 件式表壳。

具有 22° 角度、阀袋和 22 毫米销的石墨涂层过共晶活塞。

发动机排量：1600cc
行程：74mm
活塞：过共晶
圆顶 CC：17
压缩率：9.2:1
活塞角度：22°

套件包括： 4 个活塞、一组活塞环以及 4 个腕销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186EP

您正在查看的产品与这些编号存在交叉引用关系

This is a new set of Big Bore 86mm Porsche 356/912 pistons.



Fits: Porsche 356C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece Case.

Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin.

Engine size: 1600cc
Stroke: 74mm
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186SP

您正在查看的产品与这些编号存在交叉引用关系

This is a new set Porsche 356/912 JE High Compression pistons.



Fits: Porsche 356 C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece case.

JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket and the 30° Angle. This is a High Compression Piston kit 11.5:1 more commonly used in race-cars .

Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°

Kit includes: 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008118

您正在查看的产品与这些编号存在交叉引用关系

This is a new set 86mm Porsche 356/912 JE pistons.



Fits: Porsche 356C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case.

JE Forged pistons with 30° Angle. JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket

Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186JEP

您正在查看的产品与这些编号存在交叉引用关系

这是一套全新的 86 毫米保时捷 356/912 JE 活塞。

#复古表演#

适合：保时捷 356A 和 356B、Super 90、1955-63 年，带 3 件式表壳。

JE 锻造活塞，角度为 22°。JE 锻件由 2618 铝制成，具有 0 偏移，顶部下方有额外的材料用于阀袋。

发动机排量：1600cc
行程：74mm
活塞：JE 2618 锻造
圆顶高度：.155
压缩率：9.5:1
活塞角度：22°

套件包括： 4 个活塞、一组活塞环以及 4 个腕销和夹子。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0081186JEAP

您正在查看的产品与这些编号存在交叉引用关系